18 Years Factory Forming Machine Supplier - XCH130/110/13.5 Thick Plastic Molding Machine – Mengxing
18 Years Factory Forming Machine Supplier - XCH130/110/13.5 Thick Plastic Molding Machine – Mengxing Detail:
Machine Details
I,Work principle
Using the thermoplastic sheet is heated and softened in the mold for vacuum molding, become necessary products. Their work is the clip – heating – forming – products.
Feature
01. Mechanical, pneumatic, electrical integration. Each action program controlled by the PLC. Touch-screen operation, simple and convenient.
02. Loading easier, less scrap molding material savings.
03. Heater motor, frequency control, high-speed accurate and stable.
04. Electric furnace temperature control system is fully computerized intelligent automatic compensation control, partitioning a controlled man-machine interface of a digital input, with high precision fine-tuning, temperature uniformity, fast heating (just five minutes from 0-400 degrees), stable ( influence from external voltage, temperature fluctuations of not more than 1 degree), low energy consumption (saving about 15%), long life plate stove, electric bricks etc. automatically detected.
05. Suitable convex molding, molding height, stable product quality.
06. The mold seat with electric limit adjustment, adjust quickly and easily.
07. Device is equipped with air-cooling system that allows products to cool faster and better styling.
08. Production counts, or can be set to automatically shut down ahead of the police, with file memory function, can store up to 230 product parameter data
09. The die table using mosaic lubricated bearings, freedom of movement and accurate.
10. Die clip structure movements and synchronized by the rack and pinion structure linkage, the lifting synchronization, extending cylinder life
11. Operating side using safety grating devices to ensure the safety of the operator misuse.
Technical Parameter
|
Parameter |
XCH130/110/13.5(mode No.) |
|
| Max. forming area (mm2) |
1300mm*1100mm |
|
| Min.forming area (mm2) |
1200mm * 1000mm |
|
| Sheet specifications (Max.) |
1370mm * 1170mm |
|
| Thickness of sheet applied |
0.8-3mm |
|
| Max. molding height |
135mm |
|
| Capacity |
1-3 (times/min) |
|
| Gas source | Air consumption (m3/min) |
≥ 2 |
| Pressure |
0.6Mpa(inlet 0.8-1Mpa) |
|
| Vacuum pump (Outlay) |
Busch R5 0100 |
|
| Power |
three-phase four-wire 380V / 220V 50Hz |
|
| General power |
64KW |
|
| Dimensions ( L × W × H) (mm) |
4200 * 2410 * 2900 |
|
| Total weight (Kgs) |
4000 |
|
Technical Configuration
| Programmable logic controller (PLC) |
Taiwan Delta |
| Touch screen monitor(10.4 “inch / Color) |
Taiwan Delta |
| Inverter |
Taiwan Delta |
| Feeding motor |
China |
| Heater （99pcs） |
China |
| Solid state relay AC contactor |
Germany Siemens |
| Thermo relay |
Japan Omron |
| Vacuum pump |
Busch R5 0100 |
| pneumatic components |
South Korea |
| Cylinder |
China |
| Fan blower |
China |
Sample Pictures
Container Pictures
Product detail pictures:
Related Product Guide:
The key to our success is Good Product Quality, Reasonable Value and Efficient Service for 18 Years Factory Forming Machine Supplier - XCH130/110/13.5 Thick Plastic Molding Machine – Mengxing , The product will supply to all over the world, such as: Naples, Niger, Hongkong, We've been proud to supply our products and solutions to every auto fan all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
By Modesty from Slovenia - 2018.02.21 12:14
A good manufacturers, we have cooperated twice, good quality and good service attitude.
By Elaine from Liverpool - 2017.10.23 10:29
Products categories
-
2022 Good Quality Thermoform Fill Seal Machine ...
-
Factory selling Petg Sheets Vacuum Forming - X...
-
Factory wholesale Jintai Vacuum Forming Machine...
-
Hot New Products Plastic Cup Machine - MTC 400...
-
Hot-selling Plastic Film Rewinding Machine - M...
-
Factory Price For Thermoforming Blister Packagi...