High Quality for New Pressure & Vacuum Forming Machine - XC100-130/125-WF Full-auto Cooling Tower Fill Making Machine – Mengxing
High Quality for New Pressure & Vacuum Forming Machine - XC100-130/125-WF Full-auto Cooling Tower Fill Making Machine – Mengxing Detail:
Machine Details
Usage
This vacuum forming machine is widely used for making vacuum formed products like cooling tower fills from PVC, PS, PP, EPS, PET, Bio-degradable material, APET, PETG and so on.
II,Operation Principle
Operation processes: The heated and soften plastic sheet are being vacuum formed in the mold in order to get the various finished products. The operation processes are: sheet-feeding—heated—forming—side trimming— crosscut.
Structure Feature
01. The machine is combined with pneumatic , mechanical and electricity driving, adopt PLC control . It can achieve sheet feeding , heating , forming , side trimming , crosscut into continuous job .
All working action can adjust uder non-stop production . It’s convenient and high capacity , easy for operation .
02. The working method can crosscut by different pattern of fill .
03. Servo motor feeding , feeding length stepless adjustabe , precision and reliable.
04. Cutting unit with servo motor driving , electrical & pneumatic adjustable by different length crosscut ( the length must be longer than each forming mold length ) .
05. Forming area is big and easy for mold installation & replace.
06. Cylinder roll sheet loading , feeding chain manual adjust.
07. Upper , lower mold stroke limited , up mold descend motor adjust.
08. Forming area double adjustable , can save the sheet material .
09. Back acting plate adopt double cylinder method , motor setting position .
10.Vacuum in two steps.
11. Fan blowing , air spray cooling device .
12. Heater adopt individual heating temperature control . ( Point to Point )
13. Advance sheet feeding , heating parameter can automatic adjust.
Technical Parameter
|
Parameter |
XC100-130/125-BWF (mode No.) |
|
| Suitable sheet width(mm) |
1000-1300 |
|
| Sheet thickness(mm) |
0.3-1 |
|
| Max.dia. of sheet roll (mm) |
600 |
|
| Up mold stroke(mm) |
300 |
|
| Down mold stroke(mm) |
250 |
|
| Max. forming area(mm2) |
1200×1200 |
|
| Max. forming height(mm) |
120 |
|
| Max. forming depth(mm) |
100 |
|
| Capacity (cycle/min) |
4-8 |
|
|
Product Shaping& Cooling |
Air vent qty. |
7PCS |
| Air sprayer qty. |
16PCS |
|
| Gas source (outlay) | Air supply (m3/min) |
≥3 |
| Pressure(MPa) |
0.8 |
|
| Water consumption |
4-5 Cube/Hour |
|
| Vacuum pump ( Outlay ) |
Busch R5 0100 |
|
| Power supply |
3-phase 4-wire 415V/ 220V 50Hz |
|
| Heating power(Kw) |
59.4 |
|
| Feeding motor power(Kw) |
3.0 |
|
| Power of whole machine(Kw) |
68.6 |
|
| Dimension(L×W×H)(mm) |
9600×3400×2500 |
|
| Weight(Kgs) |
7500 |
|
Technical ParameterV,Technical Configuration
| PLC |
Taiwan Delta |
| Touch screen monitor ( 10.4″inch /Color ) |
Taiwan Delta |
| Feeding motor（3.0kw） |
Taiwan Delta |
| Heater with probe(1pcs) |
Germany |
| Heater(99pcs) |
China |
| Solid voltage regulator |
China |
| Contactor |
Germany Siemens |
| Thermo relay |
Germany Siemens |
| Relay |
Japan Omron |
| Vacuum pump(2 set) |
Busch R5 0100 |
| Pneumatic component |
Japan SMC |
| Cylinder |
China |
| Air sprayer(8pcs) |
Meiji |
| Fan blower(4×0.55 Kw ) |
Manda |
Sample Pictures
Container Pictures
Product detail pictures:
Related Product Guide:
The corporate keeps towards the operation concept scientific administration, superior quality and performance primacy, client supreme for High Quality for New Pressure & Vacuum Forming Machine - XC100-130/125-WF Full-auto Cooling Tower Fill Making Machine – Mengxing , The product will supply to all over the world, such as: Mexico, Malaysia, Nigeria, If you are for any reason unsure which product to select, do not hesitate to contact us and we will be delighted to advise and assist you. This way we will be providing you with all the knowledge needed to make nice choice. Our company strictly follows Survive by good quality, Develop by keeping good credit. operation policy. Welcome all the clients old and new to visit our company and talk about the business. We are looking for more and more customers to create the glorious future.
By Salome from Philadelphia - 2017.06.25 12:48
In China, we have purchased many times, this time is successful and satisfactory, a sincere and realiable Chinese manufacturer!
By Joanne from Eindhoven - 2017.04.18 16:45
