Welcome to Shantou Mengxing!
banner12

QZC50-80/120-CWF Thermoformer

Short Description:

1.720x750mm thermoforming area;
2.Max depth 100mm;
3.Fastest 16 cycles/min running with PET/PS sheet. (Not dry running)


Product Detail

Product Tags

Machine Details

QZC 50-80120-CWF
QZC

I,Feature

01. Mechanical, pneumatic and electrical combination. All working actions are controlled by PLC with touch screen, very easy and convenient in operation.
02. Servo motor feeding, feeding length is steplessly adjusted, which is fast and accurate. (Max.speed:1000mm/s)
03. Heater with intellectual temperature control system can automatically supply the heating individual heater control, which is convenient for temperature's uniformity.This system has advantages of easy operating, convenient, fast heating(only 5 min from 0-400degree), stable(won't be effected by outter voltage,temperature fluctuation is less than 1 degree),saving energy(about 15%) and long life of the usage of firebacks.
04. ]Double heater(up and down) with sheet pro-heat equipment.
05. With sheet drooping detection and protection equipment.
06. Feeing sheet ahead of time. The machine has the automatically memory function of heating time to make the machine access the normal working situation at the very beginning.
07. Mould delay.
08. The forming up and down mould use the pneumatic double elbow system and the guide bushing uses inlay bearing with solid lubricant(JFB) to make the up and down mould work stably and accurately. The mould clamping force is large and good for improving the quality of the products.
09. Heater automatically push-out function make it possible to pur off and on the machine without cutting the sheet during the production procedure, then saving the sheet.
10 . The up and down moulds use electrically adjusting system, is high speed and convenient.
11. With quickly change mould equipment, pneumatically clamping.
12. The up mould equips assistant stretching air cylinder and the down mould equips assistant demoulding air cylinder.
13. The forming has several type to be chose---vacuum forming, pressure forming, vacuum and pressure forming.
14. Automatically roll sheet loading, ease the labour intensity.

II,Technical Parameter

Parameter

QZC50-80/120-CWF (mode No.)

Available Sheet(mm)

500-760

 Sheet thickness(mm)

0.3-1.5

  Max.dia. of sheet roll(mm)

600

 Up mould stroke(mm)

130

 Down mould stroke(mm)

130

  Max.forming area(mm2)

720×750

 Max.forming height(mm)

70

 Max.forming depth(mm)

100

  Capacity (Cycle/min)

6-16

   Gas Source   Air supply (m3/min)

≥3

 Pressure(MPa)

0.8

  Water consumption

4-5 Cube/Hour

  Vacuum pump

Busch R5 0100

 Power

380V/ 220V 50Hz

 Heater power (Kw)

86.4

 Motor power (Kw)

8

 General power (Kw)

96

 Dimension (L×W×H)(mm)

About 7500×1800×2300

  Weight (Kgs)

About 7800

III,Technical Equipment

 PLC

Taiwan Delta

Touch screen monitor ( 10.4″inch /Color )

Taiwan Delta

 Feeding motor(4.5kw)

Taiwan Delta

 Heater

Germany

 Solid voltage regulator

China

 Contactor

Germany  Siemens

 Thermo relay

Germany  Siemens

 Relay

Germany Weidmuller

 Vacuum pump

Busch  R5 0100

 Pneumatic

Japan  SMC

 Cylinder

China

Sample Pictures

3
17
11
8
34
19
9
57
33
37
60
10

Container Pictures

1
3
2
6
5

  • Previous:
  • Next: